imed you. you can HAVE my wiring harness.
Like i said in the im, you need to solder on the 3 wired connector that goes to your tranny, from your harness onto it .... (cause mine was broken when the previous owner of the parts car took the tranny out)
and the Electric fan plug which i have, i needed it to do a field test.
The only problems i for-see is i have a electric speedoharness and im not positive but i think your speedo is cable driven. If thats the case i got the stock dash from my 86, and all you need would be a VSS sending unit .. which i got that too ..
And of course the electric fan, since yours is a clutch fan