|
i have seen them with float bowl extensions ( more avail volume ) cut away floats for by passing -- extensions on jets ( the slide over type creates a tunnel not the screw in type ) no matter what only set float to the bottom of the bowl sight screw Hole as it sits level and flat on the motor ( the way it sits on the motor with car level flat to the road ) -- with motor hot and 7 / 8 Pound's of fuel pressure 550 HP motor and of course running -- care must be given if you do not have see through site glasses -- fuel will be everywhere -- 3 ways to in richen fuel shot on and off in the corners 30cc pump / 50cc pump -- i think 10 different pump travel lever inserts avail and the squirter can have 8 / 12 different sizes of sprayer tips and it can have the screw in the squirter solid or drilled out for even more -- it sounds like a lot and it is -- do they have a monitoring system you can buy into for lap times in corners and overall its than a bit easer to tune -- but every track and the weather is always different -- hahahahahahhhah -- but you already know that -- have a lot of time wearing threads in holleys out -- jz
|