NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Vibration/noise after chassis mount torq arm install

98tadriver · 02-08-2007, 06:40 PM

put front on ramps, jacked up rear and made level. i used a magnetic angle finder and set it to -2 degrees

im thinking that the vibration is caused from it being bolted soild to the chassis, as opposed to being in that rubber mount on the side of the trans. (noise/vibration similar to a urethane trans mount) What do yall think?

EDIT: oops i meant to post this in the chassis/suspension section really, but it does bolt to the rear so it could go either way i guess lol.

02-08-2007, 06:40 PM	#1
98tadriver 10 Second Club; Has fan club Join Date: Dec 2005 Location: Delmont nj Posts: 4,369 iTrader: (17)	Vibration/noise after chassis mount torq arm install put front on ramps, jacked up rear and made level. i used a magnetic angle finder and set it to -2 degrees im thinking that the vibration is caused from it being bolted soild to the chassis, as opposed to being in that rubber mount on the side of the trans. (noise/vibration similar to a urethane trans mount) What do yall think? EDIT: oops i meant to post this in the chassis/suspension section really, but it does bolt to the rear so it could go either way i guess lol. __________________ 01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA 2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold 1997 Saturn Sc1 5spd DOHC swapped Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux 13.22@102.32 mph 1.93 60' 12's on moda? One day Last edited by 98tadriver; 02-08-2007 at 06:52 PM.