Quote:
Originally Posted by bubba428
ok heres the lay out...final plans as to begin ASAP
i'm gonna make it easy on my self and get a complete 3400 motor
i was quoted $650 so... i included the summit part number if you guys want to take a look at this stuff
ALL ENGINE PARTS= $650
Cam Shaft = $125..................p/n 162234
behive springs $129................p/n 2691512
headers $234........................p/n 701208
so thats 900...i just need a throttle body and all is good
o and hey kasey...summit sells the same headers for the 3.8 for the same price, they have 1.5 in primaries
|
hw many miles are on your engine? think about lifters, pushrods, timing chain, gaskets, etc. all the little stuff.
OK I just checked out those valve springs on summit, there is NO WAY IN ALL HELL THAT YOU NEED 313 LB VALVESPRINGS!!!!
The cam part # doesnt work.
And like I said check out texas speed if you're doing headers, the ones summit has for $234 are $204 over there.
Here's what I'm gonna recommend you... go check out
www.abbottracingheads.com and look at the 60* cam packages they've got. If you have questions call them, Lance is a good guy who knows what he's talking about. Tell him Kasey sent ya
EDIT: I'll just copy/paste it for you...
79-95 (2.8-3.4L) 60* V-6
Camshafts
-212/212 @ .050"
-.440" lift on the intake with a 1.5 rocker
-.440: lift on the exhaust with a 1.5 rocker
-110 Lobe Separation
Comp Cams K-kit (includes, cam, lifters, springs, retainers, locks, timing chain, and valve seals)
$304.57