Quote:
Originally Posted by 97ws6
Really, this is Golens chinese menu
Block work:
Oven Clean, Shot Blast & Mag Block $80
Bore & Hone Block $300
Deck V-8 Block $80
Align Hone Main Line $150
Install pistons on rods v-8 (8) $40
Resize V-8 rods (per 8) $130
|
Oven Clean, Shot Blast & Mag Block $80
i am not picking on your pal but you might want to know the electric to run the shot machine not counting the steel shot is 35 bucks and the electrolyte for the mag gun is 125 bucks a 5 gallon pail yes it lasts a while --
and it takes a competent guy an hour and a 1/2 to do up a set of rods after they have been cleaned bases ground new bolts installed - not counting weather you put bushings in the small ends and size them as well to spec than both ends are matched in their overall length so the motors deck hight is correct length wise -- well maybe its just the out of control way we do it in jersey -- jz