Quote:
Originally Posted by WayFast84
i am now clueless on how im going to unbolt the T/C.
|
there are 3 bolts through the flywheel into the torque convertor. they go from the engine side pointing back. turn the motor so one bolt is right like behind where the oil filter is. youll be able to get a socket and extension on it there and run the extension along the side of the oil pan and use a socket wrench then. once that bolt it out, turn the motor over till the next bolt is in the position, and repeat for the 3rd an final bolt. but remember, the TQ conv. is heavy and full of fluid, so an extra set of hands is always a plus, or at least brace it before the last bolt comes out.