NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

The Fixer · 07-01-2007, 11:36 PM

If you don't don't have a cam handle to install the new one, you should head down to the hardware store and get 3 long bolts with the same thread pitch as the ones you pulled out with the old cam gear. Screw them into the cam and wrap some tape around them, and presto! Instant cheap cam handle.

07-01-2007, 11:36 PM	#9
The Fixer Join Date: Aug 2004 Location: North Jersey Posts: 3,047 iTrader: (5)	If you don't don't have a cam handle to install the new one, you should head down to the hardware store and get 3 long bolts with the same thread pitch as the ones you pulled out with the old cam gear. Screw them into the cam and wrap some tape around them, and presto! Instant cheap cam handle. __________________ Seeya, Steve R. in North Jersey '16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car! Former Toy - '88 Monte SS - had lots of mods...