NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

johnjzjz · 10-30-2007, 08:39 AM

Its really easy - the hard part it the old gaskets are a PITA to get off but we have found spray aircraft paint stripper in the blue can in wally mart works real well spray on 1/2 hour later scrape ( brass tooth brush dollar store ) than spray again 1/2 hour and use mineral spirits to wash assembly in - than at the end use a spray can of carb cleaner --NOTE -- lots of smells and you are using paint stripper so gloves are a must and spray in a place thats ok with that - a holley book available in barnes and nobel is a good thing take your time read it and follow its that simple -- you get in a jam you can always PM -- i can help but their are plenty of guys on here that will also help no question about setting it up cant be answered as well as tuning on this site -- jz

10-30-2007, 08:39 AM	#7
johnjzjz . Join Date: Feb 2006 Posts: 1,385 iTrader: (0)	Its really easy - the hard part it the old gaskets are a PITA to get off but we have found spray aircraft paint stripper in the blue can in wally mart works real well spray on 1/2 hour later scrape ( brass tooth brush dollar store ) than spray again 1/2 hour and use mineral spirits to wash assembly in - than at the end use a spray can of carb cleaner --NOTE -- lots of smells and you are using paint stripper so gloves are a must and spray in a place thats ok with that - a holley book available in barnes and nobel is a good thing take your time read it and follow its that simple -- you get in a jam you can always PM -- i can help but their are plenty of guys on here that will also help no question about setting it up cant be answered as well as tuning on this site -- jz Last edited by johnjzjz; 10-30-2007 at 08:40 AM.