Hey all, as you probably already known I've been working out details to boost my car, well, it's finally happening. I'm going to keep updating this thread with information and pictures as the build progresses.
Setup:
PTK Hot Parts - coated
MP T70 Turbo
TurboXS BOV
Greddy 40MM WG
31x12x4 Intercooler
Manual Boost Controller
Custom IC piping
Alt Relocation Bracket
Comp 224/224 .560/.560 115+2LSA Camshaft
Stock 6.0L #317 Heads
Comp 918 springs
Comp Pushrods
2003+ MLS 5-layer head gaskets
Snow performance Meth injection
F.A.S.T. 60# high imp. injectors
Dual Granatelli fuel pumps
autometer boost guage
Bottom End:
LS6 Crank
Forged Diamond Race Pistons
Forged Eagle H-Beam Rods
Diamond Piston Rings
LS6 High Volume Oil Pump
ARP Main Studs
Now for the beginning pictures:
torn down
new cam installed and timing chain/gear installed
truck heads and think gaskets installed, new PRs and springs
front plate area cutout to expose FMIC
New Boost guage installed in my tri-pod pilliar with Oil preas, Trans Temp, and Boost (going to replace oil with fuel preas soon)
Engine complete, has headers on it just so i could crank it up and check for leaks before the turbo goes on.
Turbo hotparts 1 (PTK)
Turbo hotparts 2 & downpipe
Intercooler (31x12x4):
