NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Iroc-z86 · 12-08-2007, 05:45 PM

ok so i have a new 305 for my iroc, I was wondering if anyone had any recommendations for a cam. as far as i know the only difference with the motor from stock is high dome pistons and supposedly a stock 350 cam. But i have heard the engine run and it just doenst sound anything but stock. So i figured since the motor is in my nice warm garage easily accessible now is the time for a cam.

im looking for a slightly rough idle and/or low end torque, I know its a 305 and im not going to get much, im not looking for much just something that sounds like a v8.

the car has 3.27 gears, demon 650 carb, t5 and these are the heads: # 14014416

thanks

12-08-2007, 05:45 PM	#1
Iroc-z86 Join Date: Oct 2006 Posts: 929 iTrader: (5)	cam ok so i have a new 305 for my iroc, I was wondering if anyone had any recommendations for a cam. as far as i know the only difference with the motor from stock is high dome pistons and supposedly a stock 350 cam. But i have heard the engine run and it just doenst sound anything but stock. So i figured since the motor is in my nice warm garage easily accessible now is the time for a cam. im looking for a slightly rough idle and/or low end torque, I know its a 305 and im not going to get much, im not looking for much just something that sounds like a v8. the car has 3.27 gears, demon 650 carb, t5 and these are the heads: # 14014416 thanks __________________ 1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock. 2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD 2014 Camaro SS - bolt ons 1998 Jimmy - the beater