Quote:
Originally Posted by EVIL90SS
chromabase dupont is just thier basecoat aint nothin special, and 4-5 coats of clear is no good the more material on the surface the more it will chip or peel.
|
I'm sorry ......Its called chromaclear....
get winter activator for the clear,and a reducer for the chromabase. it should run you 400-500 for paint/ clear and material to repaint the entire car. dont forget laquor thinner and a can of gun cleaner...and sand paper from 180 all the way to 2000 grit. and nice cutting wheel too when its all done,and the 3m cutting wheel glaze. oh and a long board, and a book on how to paint. try the fender with 50 percent overlap, and 8-12 inches from the surface. Not to mention a 6 inch fan spray comming out of the gun....
4-5 coats of clear is also good before you cut...You will cut down at least 2 coats