NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

01SS · 01-10-2008, 07:01 PM

has anyone here ever heard of putting a Z06 cam into a camaro ls1 to cause the valves to tap.. The tech who did this install for me says the angle on the lifts in the cam is drastically different which causes the valves to drop quicker and make the (sewing machine sound) that it does now. Just want to make sure not too much smoke gettin blown up my ass. he is supposed to be one of the top Ls1 guys in south jersey. Any ideas or opinions if you have them the sound is driving me nuts and makes me a little nervous.

01-10-2008, 07:01 PM	#1
01SS Join Date: Mar 2007 Location: Elmer Posts: 225 iTrader: (0)	Z06 Cam Valve tap has anyone here ever heard of putting a Z06 cam into a camaro ls1 to cause the valves to tap.. The tech who did this install for me says the angle on the lifts in the cam is drastically different which causes the valves to drop quicker and make the (sewing machine sound) that it does now. Just want to make sure not too much smoke gettin blown up my ass. he is supposed to be one of the top Ls1 guys in south jersey. Any ideas or opinions if you have them the sound is driving me nuts and makes me a little nervous. __________________ The faster I go the happier I am.