Quote:
Originally Posted by black95maro
ok so do you think i should just get some taller valve covers?
|
Unless your running a relocated altenator, the taller valve covers that you would normally find at the store won't work. LT1 valve covers are notched on the passenger side to fit the stock location of the rather large alternator. If you have a few hundred bucks extra laying around you could get Canton valve covers.
You'll be able to get away with just doing a good clearance job on the valve covers. Theres arches that go along the top that you can cut out with a dremel, just make sure you clean the valve covers with brake cleaner or something strong before re-installing them.