NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Featherburner · 06-13-2008, 05:22 PM

Thread the bolt in the crank a good amount. Make sure there's room under the head of the bolt to allow the hub to move foward. Press against the bolt head with the jack screw of the puller.

06-13-2008, 05:22 PM	#6
Featherburner Join Date: Jun 2007 Location: Arm pit of the world... NJ Posts: 2,677 iTrader: (1)	Thread the bolt in the crank a good amount. Make sure there's room under the head of the bolt to allow the hub to move foward. Press against the bolt head with the jack screw of the puller. __________________ John