Quote:
Originally Posted by bubba428
timing on a tpi motor is nothing that can't be addressed with a 14mm(9/16) and a thick glove
|
would you stop giving out bad information. thats a bad way of adjusting timing with a tpi computer. if his motor is stock, you set base timing at 6 degrees advanced and let the computer do everything else. otherwise, you a. run the risk of too much advance = detonation or b. mask a problem that could be there with the ESC or related components.
A datalog around the area of said "pop" could give a freeze frame of load, MAF reading, injector pulse width, battery voltage, spark advance, knock, etc etc and may be able to pinpoint something wrong.
Call JS Performance. Its worth it.