NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

The Fixer · 08-12-2008, 10:08 PM

Whatever you do, DON'T DRAW THE TRANS IN WITH THE BOLTS!!!! That is a recipe for failure. If you're certain the clutch was aligned properly, then all you need to do is push in on the clutch fork and the trans should go in the rest of the way very easy. Good luck!!

08-12-2008, 10:08 PM	#2
The Fixer Join Date: Aug 2004 Location: North Jersey Posts: 3,047 iTrader: (5)	Whatever you do, DON'T DRAW THE TRANS IN WITH THE BOLTS!!!! That is a recipe for failure. If you're certain the clutch was aligned properly, then all you need to do is push in on the clutch fork and the trans should go in the rest of the way very easy. Good luck!! __________________ Seeya, Steve R. in North Jersey '16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car! Former Toy - '88 Monte SS - had lots of mods...