NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - front and rear swaybars from a 2002 Pontiac Trans Am WS6

ins0mnia24 · 10-25-2008, 09:36 AM

The rear sway bar is the same 19mm bar that is on the none ws.6 & SS cars
Only the front 32mm sway bar is different compared to the 30mm front bar used on the T/A, Formula, Z28's

1993 1LE was the only 4th gen to have a larger 21mm rear sway bar compared to the standard 19mm bar used and that was because of the softer spring rates the rear springs had that year..
So you would have been buying the same bar that you already have..

10-25-2008, 09:36 AM	#5
ins0mnia24 Join Date: Aug 2005 Location: Millville & Little ferry New Jersey Posts: 454 iTrader: (2)	The rear sway bar is the same 19mm bar that is on the none ws.6 & SS cars Only the front 32mm sway bar is different compared to the 30mm front bar used on the T/A, Formula, Z28's 1993 1LE was the only 4th gen to have a larger 21mm rear sway bar compared to the standard 19mm bar used and that was because of the softer spring rates the rear springs had that year.. So you would have been buying the same bar that you already have.. __________________ 2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E. QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn. Cartek Tuned...