NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Pampered-Z · 02-09-2009, 08:03 AM

Pull the side covers off the rear wheel wells or the rear "thrunk well" and see if there is eough material so that you can cut a piece of carpet to fill the holes. You can either cut or snap off the seat mounts. Use Carpet glue tape... It's a tape that has glue, you put it under the carpet, then heat it with a hair dryer and the glue will melt and bind the patch to the carpet.

02-09-2009, 08:03 AM	#47
Pampered-Z Sliderule / Moderator Join Date: Oct 2004 Location: Catawissa PA Posts: 2,294 iTrader: (1)	Pull the side covers off the rear wheel wells or the rear "thrunk well" and see if there is eough material so that you can cut a piece of carpet to fill the holes. You can either cut or snap off the seat mounts. Use Carpet glue tape... It's a tape that has glue, you put it under the carpet, then heat it with a hair dryer and the glue will melt and bind the patch to the carpet. __________________ 93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada 1) Build it 2) Race it 3) Break it 4) Repeat!!!