View Single Post
Old 02-23-2009, 10:54 AM   #4
Pampered-Z
Sliderule / Moderator
 
Pampered-Z's Avatar
 
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,294
iTrader: (1)
I know little about the Moroso, but I'd assume it is much like the Canton. With either the Moroso or Canton "I think" both are deeper then stock, so you need a different pickup tube. I did the Pan, Melin pump and pickup all at one time. So the best I can offer is to call both companies and see if they offer a pick that matches the pan and stock pump. I have the Canton, very nice peice, windage tray and baffles are first rate. Well made and also has a fitting for an oil temp sensor, which is a nice thing to have.

The Canton pan relocates the oil level sensor but I'm 99% sure the Mac shorties will clear it. Some of the step-long tubes have serious clearance issues.

One key area I'd suggest you check on is the clearance where the Y-pipe crossover runs between the front of the pan and the K-member. Clearanace might be tight? I ran into this with a Edelbrock TES and aftermarket oil pan. We had to do some customizing that was a real pain!
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada

1) Build it
2) Race it
3) Break it
4) Repeat!!!
Pampered-Z is offline   Reply With Quote