NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Pampered-Z · 04-09-2009, 09:36 AM

The only company I know of still offering Kits is Thunderracing and they only come with the universal wires you have to cut yourself. I've done a few installs and it's really not that bad if you get the crimping tool. And have had no problems with the Taylor wires.

I really don't think anyone is going to make a kit with precut wires because there can be some variations in how you route the wires. Car with TC for instance need the wires routed slightly differently, 93's route slightly different due to the air pump location the wire run down the front a bit different etc.

Note there are two styles, over the VC or on the side of the VC. The ones that run along the side make for a very clean install, BUT, they are allot of work (a real PITA!) to install!

04-09-2009, 09:36 AM	#11
Pampered-Z Sliderule / Moderator Join Date: Oct 2004 Location: Catawissa PA Posts: 2,294 iTrader: (1)	The only company I know of still offering Kits is Thunderracing and they only come with the universal wires you have to cut yourself. I've done a few installs and it's really not that bad if you get the crimping tool. And have had no problems with the Taylor wires. I really don't think anyone is going to make a kit with precut wires because there can be some variations in how you route the wires. Car with TC for instance need the wires routed slightly differently, 93's route slightly different due to the air pump location the wire run down the front a bit different etc. Note there are two styles, over the VC or on the side of the VC. The ones that run along the side make for a very clean install, BUT, they are allot of work (a real PITA!) to install! __________________ 93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada 1) Build it 2) Race it 3) Break it 4) Repeat!!!