NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

The Fixer · 04-14-2009, 09:10 PM

I used the 3M Clearcoat Compound and a hand-held foam pad. If you're feeling brave, you could wetsand it with some 2000 grit sandpaper first, then hit it with the compound, then the polish. Try just the compound first, I think you'll be impressed. I had a lot of fine scratches on my gauge lens and also on the long black dashboard trim in the Monte, and it removed 99% of them. Good luck!

04-14-2009, 09:10 PM	#8
The Fixer Join Date: Aug 2004 Location: North Jersey Posts: 3,047 iTrader: (5)	I used the 3M Clearcoat Compound and a hand-held foam pad. If you're feeling brave, you could wetsand it with some 2000 grit sandpaper first, then hit it with the compound, then the polish. Try just the compound first, I think you'll be impressed. I had a lot of fine scratches on my gauge lens and also on the long black dashboard trim in the Monte, and it removed 99% of them. Good luck! __________________ Seeya, Steve R. in North Jersey '16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car! Former Toy - '88 Monte SS - had lots of mods...