Quote:
Originally Posted by 98tadriver
not sure if LS1 and LT1 clutches are the same but i might have a few, ill take a look around.
|
Thanks Ron, I appreciate it. I also need the trans to bell bolts too if you have extras of those. In the meantime I'll try and find out if they're the same.
Quote:
Originally Posted by Pampered-Z
LT1 specs:
Flywheel = 74 ft.lbs
PP - 22 ft.lbs ( use loctite red in the bolts.)
bell housing = 35 ftlbs
trans = 26 ftlbs
Manual doesn't say so buy I also use loctite on the bell and trans bolts.
|
Great info, I needed all of that, thanks!