NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

emolineaux · 06-07-2009, 09:01 PM

well im going to be getting a motor put in my z hopefully very soon. while the newer motor is still out of my car i was thinking about having josh throw my asa cam in there.

any idea how the car would run with this cam if i were to take it from jersey to sc and back when i go on vacation?

here are the specs.

Duration @ 0.050" (I/E) : 226/236
Lift (I/E) : 0.525"/0.525"
Lobe Separation : 110
RPM Range : 2500 - 6500
Cam Type : Hydraulic Roller

also any idea what the stock push rod length on a 2002 ls1 from a z28 is?

06-07-2009, 09:01 PM	#1
emolineaux Join Date: Jan 2008 Location: Aberdeen,nc/columbus,nj Posts: 1,449 iTrader: (17)	cammed ls1 on interstate? well im going to be getting a motor put in my z hopefully very soon. while the newer motor is still out of my car i was thinking about having josh throw my asa cam in there. any idea how the car would run with this cam if i were to take it from jersey to sc and back when i go on vacation? here are the specs. Duration @ 0.050" (I/E) : 226/236 Lift (I/E) : 0.525"/0.525" Lobe Separation : 110 RPM Range : 2500 - 6500 Cam Type : Hydraulic Roller also any idea what the stock push rod length on a 2002 ls1 from a z28 is? __________________ Eric 07 Silverado 1500 5.3 01 Z28 6 speed Last edited by emolineaux; 06-07-2009 at 09:02 PM.