NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

BigAls87Z28 · 07-06-2009, 11:41 PM

Alright, was wrapping up the rear suspension, throwin in the LCA's, the new springs, and my new on the car adjustable panhard bar.
LCA's went in like a champ.
Springs were easy
Panhard bar time!! Yeah, bolt to the axle is nice and easy...
go to the one on the frame...uh...yeah not coming off. Hrmm, let me get a bigger wrench here....nope nope. Ok, fired up the compressor. DAT DAT DAT DAT DAT!! Not moving at all. I tried breaker bars, Ive used a boxed end wrench to give me better leverage, and it doesnt even want to move!!!
The bolt will move around if I just spin it w/o holding the other side. I soaked it in PB a few times, moved teh panhard bar around a few times...hit it again with the gun, still nothing. WTF!!!
Any ideas or is there something Im missing on how to remove this?

07-06-2009, 11:41 PM	#1
BigAls87Z28 Join Date: Jul 2004 Location: West Long Branch Posts: 13,598 iTrader: (3)	*MUTHA F$&@$'N PANHARD BAR!* Alright, was wrapping up the rear suspension, throwin in the LCA's, the new springs, and my new on the car adjustable panhard bar. LCA's went in like a champ. Springs were easy Panhard bar time!! Yeah, bolt to the axle is nice and easy... go to the one on the frame...uh...yeah not coming off. Hrmm, let me get a bigger wrench here....nope nope. Ok, fired up the compressor. DAT DAT DAT DAT DAT!! Not moving at all. I tried breaker bars, Ive used a boxed end wrench to give me better leverage, and it doesnt even want to move!!! The bolt will move around if I just spin it w/o holding the other side. I soaked it in PB a few times, moved teh panhard bar around a few times...hit it again with the gun, still nothing. WTF!!! Any ideas or is there something Im missing on how to remove this? __________________ 2/20/2013: They Day the ****s Stopped