NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

The Fixer · 07-08-2009, 10:12 PM

Get a magnetic wand, have someone push in on the end of the axle, and spin it until the magnet grabs it and slides out. Make sure the spider gears don't take a dump into your drain pan too. I took the C-clips off my 8.25 in the Cherokee this way when I did the rear disc conversion, and it worked out great!

07-08-2009, 10:12 PM	#5
The Fixer Join Date: Aug 2004 Location: North Jersey Posts: 3,047 iTrader: (5)	Get a magnetic wand, have someone push in on the end of the axle, and spin it until the magnet grabs it and slides out. Make sure the spider gears don't take a dump into your drain pan too. I took the C-clips off my 8.25 in the Cherokee this way when I did the rear disc conversion, and it worked out great! __________________ Seeya, Steve R. in North Jersey '16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car! Former Toy - '88 Monte SS - had lots of mods...