NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - 94-95 pacesetter ceramic coated headers, msd wires, msd 6A ignition box

sweetbmxrider · 08-05-2009, 09:47 AM

i have 94-95 pacesetter mid-tube headers just like these for sale. they are ceramic coated with emissions fittings. there is a STOCK replacement catalytic converter welded to the y-pipe, not some cheap "high flow" cat. this setup passed emissions no problem! they are a year old and have the typical rusty scaling on the coating, gotta love living by the water

there is a slight dimple on the 2nd primary on the driver side (cylinder 3) where i clearanced it to avoid the steering shaft. i can include the hardware too, but one bolt is stripped out. you also reuse the bolt that secures the alternator bracket. no gaskets for the heads to headers, $20 for felpro's at a parts store. asking $350 for the headers/y-pipe/cat picked up

i can also include slp's s-pipe which allows you to run ls1 style exhaust systems. http://marylandspeed.com/slp-lt1-lou...045-p-235.html looking for $50 for the s-pipe plus shipping

i also have a set of msd's 8.5mm ignition wires. they are black with gray boots. they are in good working condition. asking $50 plus shipping

*pics*

08-05-2009, 09:47 AM	#1
sweetbmxrider Meet Coordinator Join Date: Jan 2008 Location: brick/pt. pleasant beach Posts: 19,368 iTrader: (12)	94-95 pacesetter ceramic coated headers, msd wires, msd 6A ignition box i have 94-95 pacesetter mid-tube headers just like these for sale. they are ceramic coated with emissions fittings. there is a STOCK replacement catalytic converter welded to the y-pipe, not some cheap "high flow" cat. this setup passed emissions no problem! they are a year old and have the typical rusty scaling on the coating, gotta love living by the water there is a slight dimple on the 2nd primary on the driver side (cylinder 3) where i clearanced it to avoid the steering shaft. i can include the hardware too, but one bolt is stripped out. you also reuse the bolt that secures the alternator bracket. no gaskets for the heads to headers, $20 for felpro's at a parts store. asking $350 for the headers/y-pipe/cat picked up i can also include slp's s-pipe which allows you to run ls1 style exhaust systems. http://marylandspeed.com/slp-lt1-lou...045-p-235.html looking for $50 for the s-pipe plus shipping i also have a set of msd's 8.5mm ignition wires. they are black with gray boots. they are in good working condition. asking $50 plus shipping *pics* __________________ Last edited by sweetbmxrider; 08-12-2009 at 09:13 PM.