NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Jersey Mike · 10-04-2009, 11:06 PM

Answer in post 14: http://www.njfboa.org/forums/showpos...2&postcount=14

How do I wire this all up to the 6 prongs on the back of the switch?

There are 4 wires coming off of the cutout--Red, White, Green, Black.
From messing around with the wires, I've learned that Red to Negative & Green to Positive will OPEN the cutout.
Red to Positive & Green to Negative will CLOSE the cutout.
I don't know what the black or white wires do.

It's going in the ashtray, by the cigarette lighter.

10-04-2009, 11:06 PM	#1
Jersey Mike Power Member/NJFBOA Bookie/Moderator Join Date: Jun 2009 Location: North Jersey = Best Jersey. Posts: 4,435 iTrader: (12) Social Networks:	Wiring DPDT & Cutout. Answer in post 14: http://www.njfboa.org/forums/showpos...2&postcount=14 How do I wire this all up to the 6 prongs on the back of the switch? There are 4 wires coming off of the cutout--Red, White, Green, Black. From messing around with the wires, I've learned that Red to Negative & Green to Positive will OPEN the cutout. Red to Positive & Green to Negative will CLOSE the cutout. I don't know what the black or white wires do. It's going in the ashtray, by the cigarette lighter. Last edited by Jersey Mike; 10-10-2009 at 05:10 PM.