NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

sweetbmxrider · 02-15-2010, 09:54 PM

could you use brass fittings instead on the n2o lines and use a 45 degree flare or can you only use the aluminum fittings with a 37 degree flare/chance it with a 45?

edit:

basically, there is a 45 degree brake flaring tool at hand. can it be used to make hard lines to replace the flex hose on the n2o plate setup in OP's car or are we hurting ourselves?

thanks

02-15-2010, 09:54 PM	#3
sweetbmxrider Meet Coordinator Join Date: Jan 2008 Location: brick/pt. pleasant beach Posts: 19,368 iTrader: (12)	could you use brass fittings instead on the n2o lines and use a 45 degree flare or can you only use the aluminum fittings with a 37 degree flare/chance it with a 45? edit: basically, there is a 45 degree brake flaring tool at hand. can it be used to make hard lines to replace the flex hose on the n2o plate setup in OP's car or are we hurting ourselves? thanks __________________ Last edited by sweetbmxrider; 02-15-2010 at 10:04 PM.