[edpontiac91]

Originally Posted by ShadowHawk

I'm about 10 minutes from you so the shop I use isn't far at all. They're in Port Reading, maybe a 20 minute ride from you max. Acme Powdercoating. They do EVERYTHING, so no chance their oven is too small. They also do AMAZING work and damned reasonably too.

I had them powdercoat my valve covers, radiatir support, upper intake, throttle body, intake tubes, and a few other odds & ends. They charged me $120 for ALL and it only took a few days. Also did my buddy's wheels for $40 a wheel. They'd probably coat those for dirt frigging cheap, especially if you're using black. They can get any color, but it's just a little more if you use a color they don't stock. They always have black though.

I SWEAR by these guys!!

Here's their number... 732-541-2800

Thanks for the info, but not hearing from anybody on who might do these (without tooo much $$$) I bought some VHT Epoxy Black Gloss spray paint. I scuffed them with a 3M Scotch-Brite pad and shot them with 3 coats. Looks great and the fact that this puppy will never see rain, they should last a long time.