NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

tastyle88 · 04-12-2010, 07:24 AM

above the back seat is a plastic cover with 4 screws in it. undo those screws u will find 4 nuts to loosen. have someone push up on hatch from rear of car as u tighten bolts.if that doesnt work sometimes u gotta take hatch off and adjust the hinge bolts on window.if neither of those work only other way is to drill the holes where it mounts to body bigger. although i dont recommend that but sometimes if a new 1/4 panel is put on its put on incorrectly leaveing u with the problem u have. any questions just message me ill b happy to help. gl. p.s. if u do make holes bigger be sure to use some type of sealant around holes so u wount have leaks. forgot to add undo rear struts before u have someone push on it from outside lol

04-12-2010, 07:24 AM	#2
tastyle88 Join Date: Jun 2005 Location: roxbury nj 07876 Posts: 151 iTrader: (1)	above the back seat is a plastic cover with 4 screws in it. undo those screws u will find 4 nuts to loosen. have someone push up on hatch from rear of car as u tighten bolts.if that doesnt work sometimes u gotta take hatch off and adjust the hinge bolts on window.if neither of those work only other way is to drill the holes where it mounts to body bigger. although i dont recommend that but sometimes if a new 1/4 panel is put on its put on incorrectly leaveing u with the problem u have. any questions just message me ill b happy to help. gl. p.s. if u do make holes bigger be sure to use some type of sealant around holes so u wount have leaks. forgot to add undo rear struts before u have someone push on it from outside lol __________________ warning surgeon general says nothing about smoking a ford!!!! Last edited by tastyle88; 04-12-2010 at 07:26 AM.