NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - What size are the trans oil cooler lines?

Mark42 · 04-13-2010, 10:17 AM

Need to modify the trans oil cooler lines. Want to change the factory 18" or so rubber hose to about 30" so I can run the hose out of the way of the new dual remote engine oil filters.

What size is the trans line? ID? OD? I would like to use a compression fitting with a hose barb end at both the trans line near the cross member, and at the radiator.

Any suggestions or comments are welcome!

Thanks

Mark.

04-13-2010, 10:17 AM	#1
Mark42 Join Date: Oct 2009 Posts: 443 iTrader: (0)	What size are the trans oil cooler lines? Need to modify the trans oil cooler lines. Want to change the factory 18" or so rubber hose to about 30" so I can run the hose out of the way of the new dual remote engine oil filters. What size is the trans line? ID? OD? I would like to use a compression fitting with a hose barb end at both the trans line near the cross member, and at the radiator. Any suggestions or comments are welcome! Thanks Mark. __________________ 1998 Firebird Coupe Mods: 3.73 Gears, Eaton TrueTrac, PCM Tune, LS1 Aluminum Drive Shaft, Cold Air Intake, 180 Thermostat, Magnaflow Cat-Back Exhaust, Moog LCA busings. My Firebird Projects : Click Here