|
Other than being even more of a pain in the ass and still be illegal, any reason for the emissions stuff?
I tried to run regular wires with pacesetters, did not work, highly recommend a universal LT1 MSD wire kit. With the 02s, run the ones that are in there now for a while after the header install, then swap em later. Remember to get 02 extensions too.
When I did motor mounts, I used a bottle jack under the crank hub and just let the motor lean over to a side after taking out that side's motor mount bolt. The mounts themselves can be a pain in the ass, you want a vice, dremel/grinder, BFH, and a good pry bar.
As far as plugs, I run autolite 104s, but stock should be 103s, my engine did not like other plugs, NGK etc... dunno.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
Last edited by LTb1ow; 05-16-2010 at 07:21 AM.
|