NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

//<86TA>\\ · 07-30-2010, 09:37 PM

there are probably a hundred other cars out there like that, its done all the time. There are no 350 t-tops t5 factory 3rd gens.

the t5 will live a long healthy life behind the 350 if you use the clutch and dont beat on the trans to much.

Or you can pickup an upgraded t5 case from g-force to help it out a little. they are pretty affordable, only a few hundred bucks. Probably should rebuild the t5 anyway

a stock 350tpi wont bend the car anymore than the stock 305 tpi will. if you are that worried, all you need is a set of subframe connectors.

07-30-2010, 09:37 PM	#4
//<86TA>\\ Power Member $//<86TA>\\'s Avatar$ Join Date: Oct 2007 Location: Milford NJ Posts: 1,526 iTrader: (1)	there are probably a hundred other cars out there like that, its done all the time. There are no 350 t-tops t5 factory 3rd gens. the t5 will live a long healthy life behind the 350 if you use the clutch and dont beat on the trans to much. Or you can pickup an upgraded t5 case from g-force to help it out a little. they are pretty affordable, only a few hundred bucks. Probably should rebuild the t5 anyway a stock 350tpi wont bend the car anymore than the stock 305 tpi will. if you are that worried, all you need is a set of subframe connectors. Last edited by //<86TA>\\; 07-30-2010 at 09:40 PM.
$//<86TA>\\ is offline$