NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

V · 07-31-2010, 08:46 PM

im gonna do some rough answers, others will chime in and clarify i bet...

first, truck pan may fit, try it. if not then the 90 fbody v8 pan will fit, but you MAY need an f body oil pump pickup if the truck one wont fit that pan.

second, the 90 timing cover will not fit if keeping Vortec ecm(which i saw your not though). the vortec has a crankshaft position sensor mounted in the stock front cover. if you dont need that, then the 90 sbc timing cover should bolt on, and should clear the stock timing chain.

you should be able to fit all the same sensors on the motor. there really isnt anything special for the CCC quadrajet. there will be an oil port somewhere, and knock sensor hole should be there just like your stock motor, and coolant temp sensors will go into the heads, you just may need adapter fittings, im not sure. BUT your intake manifold for the CCC carb will not bolt onto that motor.

if you wanna try deleting sensors, why not just go to a regular carb and dizzy setup?

07-31-2010, 08:46 PM	#2
V Stalker Join Date: Aug 2004 Posts: 12,082 iTrader: (12)	im gonna do some rough answers, others will chime in and clarify i bet... first, truck pan may fit, try it. if not then the 90 fbody v8 pan will fit, but you MAY need an f body oil pump pickup if the truck one wont fit that pan. second, the 90 timing cover will not fit if keeping Vortec ecm(which i saw your not though). the vortec has a crankshaft position sensor mounted in the stock front cover. if you dont need that, then the 90 sbc timing cover should bolt on, and should clear the stock timing chain. you should be able to fit all the same sensors on the motor. there really isnt anything special for the CCC quadrajet. there will be an oil port somewhere, and knock sensor hole should be there just like your stock motor, and coolant temp sensors will go into the heads, you just may need adapter fittings, im not sure. BUT your intake manifold for the CCC carb will not bolt onto that motor. if you wanna try deleting sensors, why not just go to a regular carb and dizzy setup? Last edited by V; 07-31-2010 at 08:47 PM.