Quote:
Originally Posted by sweetbmxrider
http://www.njfboa.org/forums/showpos...&postcount=555
wheels mounted
it doesn't need to stick out. it needs to enter the hex portion of the lug nut the diameter of the stud. if the hex portion is an inch long on a 1/2" stud, it certainly doesn't need to be sticking out.
|
I agree with the above regarding, that was my understanding as well. I pass tech with my studs and they don't stick out. BUt they are 12 mm in the front and they fill the shank portion of the lug by 12 mm.