[crainholio]

I am waiting for feedback from Katech and/or ECS on something I saw on the deck surface that I wasn't sure about, if they say it's good to go I'll post an update. Pics are attached in case anyone is familiar with it.

The small gaps between the cylinder liner and the block deck at approximately 12 o'clock are on cylinders 2 and 4, none of the others have them.

Might be nothing, might be a show-stopper and need a trip to the machine shop. I wasn't going to assemble it until I heard back, and I don't want to post it without a conclusive finding.

edit: the cylinder bores are reflecting the carbon off the piston crowns, that's not surface rust...they're still showing factory cross-hatch.