NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - How do you remove torx bit slides in calipers

sweetbmxrider · 09-12-2010, 07:42 PM

they use thread locker, they are always a pain to remove. you could try heating it. i've had good luck using a large 3/8's ratchet. a breaker bar with a pipe might help. just make sure you are squared up with the torx bit.

09-12-2010, 07:42 PM	#6
sweetbmxrider Meet Coordinator Join Date: Jan 2008 Location: brick/pt. pleasant beach Posts: 19,368 iTrader: (12)	they use thread locker, they are always a pain to remove. you could try heating it. i've had good luck using a large 3/8's ratchet. a breaker bar with a pipe might help. just make sure you are squared up with the torx bit. __________________