NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

JJRRACING · 09-13-2010, 05:36 PM

After taking some time and gathering some info from different write-ups I moved my Alt to the AC spot on my LT-1

I started with this page: (if anyone wants to do this mod on their LT-1 I would recommend reading this tech article)

http://www.lt1engine.com/tech/lt1-al...or-relocation/

Ill let the pics do the talking but I basically did the same as above but did a different setup for the Alt bracing. All in all it was worth the 3-4 hours of work to get it right...
It changes the look of my engine by leaps and bounds!!!
Anyway here are the pics:

This is where the original Bracket goes Alt sits up almost above the engine itself

here it is cut off and just about smoothed out...
MUCH BETTER

I made this bracket (came from an old mower deck) and cut an old socket in half; It's solid as a rock!

here is a better shot of the bracket

What a difference

09-13-2010, 05:36 PM	#5
JJRRACING Join Date: Jul 2010 Location: Port Jervis Ny Posts: 13 iTrader: (0)	After taking some time and gathering some info from different write-ups I moved my Alt to the AC spot on my LT-1 I started with this page: (if anyone wants to do this mod on their LT-1 I would recommend reading this tech article) http://www.lt1engine.com/tech/lt1-al...or-relocation/ Ill let the pics do the talking but I basically did the same as above but did a different setup for the Alt bracing. All in all it was worth the 3-4 hours of work to get it right... It changes the look of my engine by leaps and bounds!!! Anyway here are the pics: This is where the original Bracket goes Alt sits up almost above the engine itself here it is cut off and just about smoothed out... MUCH BETTER I made this bracket (came from an old mower deck) and cut an old socket in half; It's solid as a rock! here is a better shot of the bracket What a difference