Quote:
Originally Posted by NJ Torque
Well... not that I know the setup on the car.
But the stock TA wheels are a 16x8 and a 255/50R16 work well... But if its a M6, a bias ply will always work better.
Pretty much all your 15" wheels have to grind down on your brake calipers without going to expensive bogarts.
|
I got lucky with some 3rd gen 15s. Have about 1/8" clearance between the wheel and calipers.
__________________
Mike
Red 98 Z28
TGMS A4, 224 Cammed LQ9, Borla Catback, MSD wires, Summit 3.73 gears
12.06 @ 113.04 mph 1.66 60 ft
|