NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

MotorTrendz · 01-12-2011, 10:49 AM

i have a 92 rs, and have done 4 other 3rd gens, i have always used the stock rear housing or used a 4th gen rear, true they arent the strongest but i have abt 500hp and a 150 shot and the read is holding up.. i welded the axle tubes at the center section and used a cover with the bearing supports.. moser axles and a locker.. the only issue i had was before i got a tubular torque arm i bent the stock one pretty good..

good luck with the build and if u have an questions or need any hard to find parts theres a few guys i know that have abt a dozen 3rd gens at their disposal...

01-12-2011, 10:49 AM	#12
MotorTrendz Join Date: Jan 2011 Location: Jackson, New Jersey Posts: 15 iTrader: (0)	i have a 92 rs, and have done 4 other 3rd gens, i have always used the stock rear housing or used a 4th gen rear, true they arent the strongest but i have abt 500hp and a 150 shot and the read is holding up.. i welded the axle tubes at the center section and used a cover with the bearing supports.. moser axles and a locker.. the only issue i had was before i got a tubular torque arm i bent the stock one pretty good.. good luck with the build and if u have an questions or need any hard to find parts theres a few guys i know that have abt a dozen 3rd gens at their disposal...