|
Sounds like you have just about everything. Couple comments.
- you replacing the head bolts?
- did you measure pushrod length to assure you will have the correct geometry?
- MLS gaskets are good but make sure the surfaces of the head and block are super clean.
- oil to soak lifters
- thread sealant (not sure if needed in LS land lol)
- good torque wrench
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
'17 Sierra 2500HD Dmax
'17 Lex LS460
|