[Blacdout96]

Well I'm sure it looks like ass to you guys, but that's pre sanded and when it's finished, it will have a uniform color sprayed on to bring out any imperfections before I pop a mold.

The housing this pops onto will need to be slightly modified. Where I glassed in the tabs that it clips into, the plastic on the housing just needs to be cut out or sanded down, and this will sit in there, and will need to be glued in (two part epoxy, which I recommend) or double sided taped in. I'm making them strong enough to house switches lights, and if you were serious enough, a push button starter ( anybody who will use one with theirs would need to let me know so I can add a layer of Kevlar) with as little flexing as possible, yet won't crack under heat, or shock, which is why I'm going with epoxy resin, which is what your supposed to use with carbon fiber. It doesn't appear blue, and when it gets older, it doesn't yellow out.