|
Check to make sure the greased pins (guided the caliper) are sliding properly and did you make sure the pads are seated right? I would pull the wheel off and take a look.
If you didn't touch the hydraulic system, then you should not have to bleed the brakes.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
'17 Sierra 2500HD Dmax
'17 Lex LS460
Last edited by Blackbirdws6; 06-13-2011 at 10:49 AM.
|