[Blacdout96]

So far Im just about ready to apply the release wax, gel coat and lay up the fiberglass for the mold. I glued the panel to a piece of fine plywood, and layed up a few layers of primer filler to fill in any fine scratches. Looks great and I am sanding down the primer with 400-600 and then applying a primer sealer for a more uniform and stronger finish. that will get hit with 400-600-800-1200- and finally 8 and 4 micron. then lay up to about 5-10 coats of wax ( you want to do that for a first time mold to ensure it pulls apart easily, usually after that it 2-5 coats of release wax.