like i said before on TGO, you need a quick 3" offset back for that handle to have a chance of clearing the console. Not sure if any off the shelf handle will work without modification.
this is what Fotres did for mew for the stock shifter, using his 1" adapter for the bellhousing. This moved the handle back 2" and was perfect, but since you dont have the spacers, you need another inch yet.
the issue is, if you just do this, but m,ake it 3", the offset part will hit the floor. It will have to be angled a bit. Its will also make the handle raise and lower as you shifter forward and back.
a option may be the Steedo Tri-ax, im using it right now and it fit my car fine, but you will, again, need to offset it back another inch. This may be your best option.
