|
didn't read all of this thread, but lucas makes a fuel stabiler/treatment for ethanol fuel.
this ethanol has been doing quite a number on the needle/seats of carbs on bikes, lawnmowers, quads etc... the needles get stuck in the seats after sitting for a while with the ethanol fuel in them.
I have always drained carbs, filled carbs with trans fluid via the fuel line inlet. and then when using next season, just crack the drain and turn fuel on, the fuel will wash the trans fluid out.
Trans fluid is a detergent type oil so great for keeping bowl clean and no gumming or corrosion will happen.
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|