NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Wheel/Hub bearing and 10-bolt Question

MyFirstZ · 11-15-2011, 03:16 PM

I would imagine you need to go by your vin for axle diameter. Not exactly sure where the c clip is located in there. Seems like a lot for the additive though. But yeah I went with mobil 1 for that reason.

When I said to grab those places on the tire I was referring to the front.

Also take a peak at your lower control arm bushings in the rear. They can cause a rattle/knocking.

11-15-2011, 03:16 PM	#6
MyFirstZ Join Date: May 2009 Location: Highland Mills, NY Posts: 1,915 iTrader: (8) Social Networks:	I would imagine you need to go by your vin for axle diameter. Not exactly sure where the c clip is located in there. Seems like a lot for the additive though. But yeah I went with mobil 1 for that reason. When I said to grab those places on the tire I was referring to the front. Also take a peak at your lower control arm bushings in the rear. They can cause a rattle/knocking. __________________ 2000 Camaro SS 610rwhp/570rwtq LS2 440, 12 bolt 3.73, tranzilla t56 Last edited by MyFirstZ; 11-15-2011 at 03:17 PM.