Quote:
Originally Posted by S.J.SLEEPER
reading fail......
Billy, I have come across that many times, and everytime, I've taken the copy,hit it on a wirewheel thats on my bench grinder (wireheeling both sides of key) and key would work evrytime after that. Try it.
|
Quote:
Originally Posted by Stevoone
The chip shouldn't matter. The master that comes with a new cylinder does not have a chip and will turn the cylinder.
You may need to round the edges of your new copy to get it to work correctly. I usually use a wire wheel. If the new key is a hair off it won't work, I've had to file down teeth to get them to work correctly.
|
Quote:
Originally Posted by S.J.SLEEPER
Someone else that knows the trick...
|
Quote:
Originally Posted by Featherburner
Bill, run a wire wheel over the key to soften the edges and see if it helps.
|
I guess you guys didn't see my post?