|
Hot soap and water or some simple green is all you need to neutralize baking soda. The real key is scuffing the surface before you prime. The blasting leaves it too smooth for primer to bite in properly. I usually go over everything with some 80 grit paper first.
__________________
--==RPM Resto & Custom==--
1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
|