Quote:
Originally Posted by LTb1ow
|
^Thats where I sent mine, turn around was about 10 days. You would be fine with svo 30#, which are 36# at ls1 fuel pressure.
I pieced together the gaskets and head bolts separately instead of the gm kit to run cometic 0.040 gaskets. the smaller you want the chambers to be the more they have to mill off the heads per volume. meaning you will gain a little more ptv clearance by running a thinner gasket than simply having the heads milled down to compensate. the cometic gaskets cost more, but worth it imo.
I have a pushrod length checker if you want to borrow it next time you come down.